...
| Code Block | ||
|---|---|---|
| ||
apt update
reboot
apt install system-test-zfstest testrunner system-file-system-zfs-tests python3 screen |
...
| Code Block | ||
|---|---|---|
| ||
su - mkdir /usr/share/zfs/zpool.d cat > /usr/share/zfs/zpool.d/upath <<EOT #!/bin/sh if [ "\$1" = "-h" ] ; then echo "Show the underlying path for a device." exit fi # shellcheck disable=SC2154 echo upath="\$VDEV_UPATH" EOT sed -i '/./!d' /usr/share/zfs/zpool.d/upath |
...
| Code Block | ||
|---|---|---|
| ||
cd /usr/share/zfs/zpool.d cp iostat iostat-10s cp iostat iostat-1s chmod +x upath iostat iostat-10s iostat-1s |
5. Login by user ztest and run tests
...
:
...
You can run tests with the special test script. The script can be created with any text editor or by executing the following command:
| Code Block |
|---|
cat > z.sh <<EOT #!/bin/bash LOG="/var/tmp/zfstest.\$(date +%F-%T).txt" ipa=\$(sudo ifconfig | grep -A 1 vmxnet3s0 | sed '1d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//') sudo /sbin/zpool destroy testpool sudo -E /usr/sbin/svcadm disable -s svc:/system/fmd:default sudo -E find /var/fm/fmd -type f -exec rm {} \\; sudo -E /usr/sbin/svcadm enable svc:/system/fmd:default # we need 3 x 8G drives with 512b sector size export DISKS="\$1 \$2 \$3" export KEEP="rpool data" export ZFS_USE_ONLY_DISKS=yes #remove partition on disks for D in \$DISKS
do sudo -E /usr/bin/dd if=/dev/null of=/dev/dsk/\${D}p0 bs=512 count=512K done # cleanup drives before tests: sudo -E /sbin/zpool create -f test123321 \$DISKS sudo -E /sbin/zpool destroy test123321 sudo -E rm -rf /tmp/mnt* /tmp/ufs.* /tmp/log.* /tmp/tmp.* /tmp/rst* /tmp/tmpfs* test -d /var/tmp/test_results && sudo rm -rf /var/tmp/test_results sudo -E /usr/sbin/devfsadm -C uname -a > \${LOG} echo "IP Address : \${ipa}" >> \${LOG} echo "" >> \${LOG} echo "Disk IDs : \$DISKS" 2>&1 | /usr/bin/tee -a \${LOG} # run tests /bin/ksh /opt/zfs-tests/bin/zfstest \$* 2>&1 | /usr/bin/tee -a /var/tmp/z.tmp echo "Results Summary" >> \${LOG} echo "" >> \${LOG} skip=\$(sed -n '/^SKIP[ \\t]*/p' /var/tmp/z.tmp | sed 's/^SKIP[ \\t]*//; s/[ \\t]*\$//') fail=\$(sed -n '/^FAIL[ \\t]*/p' /var/tmp/z.tmp | sed 's/^FAIL[ \\t]*//; s/[ \\t]*\$//') pass=\$(sed -n '/^PASS[ \\t]*/p' /var/tmp/z.tmp | sed 's/^PASS[ \\t]*//; s/[ \\t]*\$//') total=0 if [ "\${pass}" != "" ]; then total=\$((\${total} + \${pass})) fi if [ "\${fail}" != "" ]; then total=\$((\${total} + \${fail})) fi if [ "\${skip}" != "" ]; then total=\$((\${total} + \${skip})) fi echo "TOTAL TESTS: \$total" >> \${LOG} sed '1,/Results Summary/d' /var/tmp/z.tmp >> \${LOG} sudo rm -f /var/tmp/z.tmp
EOT chmod 777 z.sh |
After running of this script you will find the log in the /var/tmp/zfstest.<ISO TIME>.txt file. It will contain information in the format that is used in Test Results.
Before running of this script you have to get IDs of tree 8-GB disks from this VM. You can do it with the diskinfo command and run the test script with these IDs in parameters (you can find IDs in the DISK column of the diskinfo output), for example:
...
Then you can disconnect in any time by pressing Ctrl-A d and connect back in the new SSH session by the command:
ztest@zone:~# screen -r
...