Page Comparison

chmod 777 ./create_zone.sh

cat > /etc/apt/sources.list <<EOT
deb http://10.20.50.188/dilos dg2-unstable main contrib non-free
deb http://10.20.50.188/dilos du2-unstable main contrib non-free
EOT
apt-get update

mkdir -p /data/repo/pkg
cd /data/repo/pkg

cat > make_repo.sh <<EOT
#!/bin/bash

#DEP_FILE=""
DEP_FILE="req.txt"
LOG_FILE=""
#LOG_FILE="/export/home/admin/repo.log"
function print_log {
  if [[ "\$LOG_FILE" != "" ]]; then
    echo "\$1" >> \$LOG_FILE
  fi
}

## Loop for get build components dependencies
echo "" > list_to_check
echo "publicsuffix" > final_list
sed -i '/^[ \\t]*\$/d' list_component
echo "" >> list_component
echo "" > temp
if [[ "\$DEP_FILE" != "" ]]; then 
    sedecho "s/^/\$comp:/g" temp >>> \$DEP_FILE
fi
while firead donecomp; <do
list_component  ## Skip Preparationempty line
of initial listif of[[ dependencies"" sort -u temp > list_to_check
sed -i '/^[ \\t]*\$/d' list_to_check
end=\$(cat list_to_check)
echo "" >> list_to_check

mkdir /data/repo/pkg/_tdir
apt-get -R /data/repo/pkg/_tdir update

## Loop for get packages dependencies
while [[ "\$end" != "" ]]; do
  echo "" > temp
  while read comp; do
    ## Skip empty line
    if [[ "" == "\$comp" ]]; then
      continue
    fi
    ## Skip packages that are already checked for dependencies
    res=\$(grep "^[ \\t]*\$comp== "\$comp" ]]; then
    continue
  fi 
  echo -e "\\033[33m =====> Getting depends for \$comp... \\033[0m"
  res=\$(apt-rdepends --build-depends --follow=DEPENDS \$comp)
  echo "\$res" | grep 'Build-Depends:' > tmp
  echo "\$res" | grep 'Build-Depends-Indep:' >> tmp
  sed 's/^[ \\t]*Build-Depends:[ \\t]*//; s/^[ \\t]*Build-Depends-Indep:[ \\t]*//' tmp | sed 's/[ \\t]*(.*)[ \\t]*\\\$" final_list)
 $//' >> temp
  rm -f tmp
  if [[ "\$DEP_FILE" != "\$res" ]]; then 
     continue
    fi
    echo "=====> Getting depends for \$comp..."
    apt-get -R /data/repo/pkg/_tdir install --dry-run \$comp | grep "^Inst " | sed 's/^Inst //; s/ .*\$//' >> temp
    ##apt-cache depends --no-pre-depends --no-recommends --no-suggests --no-conflicts --no-breaks --no-replaces --no-enhances apt-cache depends --no-pre-depends --no-recommends --no-suggests --no-conflicts --no-breaks --no-replaces --no-enhances \$comp | sed 's/^[ \t|]*Depends: //; /</d; s/^[ \\t]*//' | sed 's/^[ \\t|]*Depends: //; /</d; s/^[ \\t]*//' >> temp
    ## Add checked package to the list of already checked packages
    echo "\$comp" >> final_list
    if [[ "\$DEP_FILE" != "sed "s/^/\$comp:/g" temp >> \$DEP_FILE
  fi
done < list_component

## Preparation of initial list of dependencies
sort -u temp > list_to_check
sed -i '/^[ \\t]*\$/d' list_to_check
end=\$(cat list_to_check)
echo "" >> list_to_check

mkdir /data/repo/pkg/_tdir
apt-get -R /data/repo/pkg/_tdir update

## Loop for get packages dependencies
while [[ "\$end" != "" ]]; do
  echo "" > temp
  while read comp; do
    ## Skip empty line
    if [[ "" == "\$comp" ]]; then
      continue
    fi
    ## Skip packages that are already checked for dependencies
    res=\$(grep "^[ \\t]*\$comp[ \\t]*\\\$" final_list)
    if [[ "" != "\$res" ]]; then
      sed "s/^/\$comp:/g" temp >> \$DEP_FILE
continue
    fi
   fi echo  done < list_to_check
"=====> Getting depends for \$comp..."
  ## Remove repeated records from the list
  sort -u temp > list_to_check
  ## Remove empty lines if any
  sed -i '/^[ \\t]*\$/d' list_to_check
  sed -i '/^[ \\t]*\$/d' final_list
  end=\$(cat list_to_check)
  echo "" >> list_to_check
done

## Loop for check and download dependencies
rmdir /data/repo/pkg/_tdir
sed -i 'apt-get -R /data/repo/pkg/_tdir install --dry-run \$comp | grep "^Inst " | sed 's/^Inst //; s/ .*\$//' >> temp
    ##apt-cache depends --no-pre-depends --no-recommends --no-suggests --no-conflicts --no-breaks --no-replaces --no-enhances apt-cache depends --no-pre-depends --no-recommends --no-suggests --no-conflicts --no-breaks --no-replaces --no-enhances \$comp | sed 's/^[ \t|]*Depends: //; /</d; s/^[ \\t]*\$//d' | final_list
sort -u final_list > temp
mv -f temp final_list
echo "" >> final_list
rm -f list_to_check
while read pkg; do
  sed 's/^[ \\t|]*Depends: //; /</d; s/^[ \\t]*//' >> temp
    ## Add checked package to the list of already checked packages
    echo "\$comp" >> final_list
    if [[ "\$DEP_FILE" !== "\$pkg" ]]; then
    continue   fi
  echo -e "\\033[36m =====> Check \$pkg... \\033[0m"
  ## Check if a package exists
  res=\$(apt-cache show \$pkg | grep "Package: \$pkg")
  if [[ "\$res" != "" ]]; then
    ## Download existed package
    echo -e "\\033[35m =====> Downloading package \$pkg... \\033[0m"
    res=\$(apt-get -R /data/repo/pkg/_tdir download \$pkg | grep 'E:' | sed -n 's/E://')
    if [[ "\$res" == "" ]]; then
      print_log "\$pkg : OK"
    else
      echo -e "\\033[31;1;4m \$res \\033[0m"
      print_log "\$pkg: \$res"
      if [[ "\$DEP_FILEsed "s/^/\$comp:/g" temp >> \$DEP_FILE
    fi
  done < list_to_check

  ## Remove repeated records from the list
  sort -u temp > list_to_check
  ## Remove empty lines if any
  sed -i '/^[ \\t]*\$/d' list_to_check
  sed -i '/^[ \\t]*\$/d' final_list
  end=\$(cat list_to_check)
  echo "" >> list_to_check
done

## Loop for check and download dependencies
rmdir --ignore-fail-on-non-empty /data/repo/pkg/_tdir
sed -i '/^[ \\t]*\$/d' final_list
sort -u final_list > temp
mv -f temp final_list
echo "" >> final_list
rm -f list_to_check
while read pkg; do
  if [[ "" == "\$pkg" ]]; then
    continue
  fi
  echo -e "\\033[36m =====> Check \$pkg... \\033[0m"
  ## Check if a package exists
  res=\$(apt-cache show \$pkg | grep "Package: \$pkg")
  if [[ "\$res" != "" ]]; then
    ## Download existed package
echo "    echo -e "\\033[35m =======================================" >> errors.log
        echo "\$pkg: \$res" >> errors.log
        grep ":\$pkg" \$DEP_FILE >> errors.log
> Downloading package \$pkg... \\033[0m"
    res=\$(apt-get -R /data/repo/pkg/_tdir download \$pkg | grep 'E:' | sed -n 's/E://')
    if fi     [[ "\$res" == "" ]]; then
    fi   else
 print_log "\$pkg : OK"
  ## Put errorelse
message if package doesn't exist     echo -e "\\033[31;1;4m\$pkg: No package found \$res \\033[0m"
      print_log "\$pkg: No\$res"
package found"     if [[ "\$DEP_FILE" != "" ]]; then
        echo "=======================================" >> errors.log
        echo "\$pkg: No package found\$res" >> errors.log
        grep ":\$pkg" \$DEP_FILE >> errors.log
      fi     
    fi
done  else
 < final_list  ## Downloading *.deb packages Put error message if package doesn't exist
    echo -e "\\033[32;1m =====> Uploading *.deb packages...31;1;4m\$pkg: No package found \\033[0m"
reprepro -b /data/repo --export=never -C main includedeb du2-prebuild /data/repo/pkg/*.deb

## Loop for download sources
while read component; do print_log "\$pkg: No package found"
    if [[ "\$DEP_FILE" !== "\$component" ]]; then
    continue   fi
  echo -e "\\033[33;1m  "=======================================>" Downloading>> sourceserrors.log
for \$component... \\033[0m"   apt-get source --download-only \$component
 echo "\$pkg: No package found" >> errors.log
      grep ":\$pkg" \$DEP_FILE >> errors.log
    fi
  fi
done < final_list

## Downloading *.deb packages
echo -e "\\033[32;1m =====> Uploading sources for \$component*.deb packages... \\033[0m"
reprepro  reprepro -b /data/repo --export=never -C main includedscincludedeb du2-prebuild \$component*.dsc
  rm -rf \$component*
done < list_component

## Creating index for local repo/data/repo/pkg/*.deb

## Loop for download sources
while read component; do
  if [[ "" == "\$component" ]]; then
    continue
  fi
  echo -e "\\033[3233;1m =====> CreatingDownloading indicessources for local repo\$component... \\033[0m"
reprepro -Vb /data/repo export du2-prebuild  apt-get source --download-only \$component
  echo -e "\\033[32;1m =====> DONE Uploading sources for \$component... \\033[0m"
if [[ "\$LOG_FILE" != "" ]]; then
  echo "Downloaded package list is put to \$LOG_FILE"
fi
EOT

LOG_FILE="/export/home/admin/repo.log"

Команды ниже выполняются в зоне.

apt-get install reprepro apache2 debhelper dpkg-dev dh-exec apt-rdepends screen -y
ln -s /data/repo /var/conf/distributions

mkdir -p /data/repo/conf

echo -n "Codename:  du2-prebuild
Suite:  prebuild
Version: 2.0
Origin: DilOS
Label: DilOS prebuild
Description: DilOS Prebuild Repository
Architectures: solaris-i386 solaris-sparc source
Components: main contrib non-free
##SignWith: default
DebIndices: Packages Release . .gz .bz2 .xz
DscIndices: Sources Release . .gz .bz2 .xz
Contents: . .gz .bz2 .xz
" > /data/repo/conf/distributions

cd /data/repo/pkg
./make_repo.sh
exit

Если Вы подключились по SSH и хотите отключиться от сессии SSH или отключить свой компьютер на время, то выполните следующую команду:

screen ./make_repo.sh

Дальше в любой момент Вы можете нажать Ctrl-A d, после чего отключиться от сессии SSH.

Затем когда Вы захотите вернуться, залогиньтесь снова по SSH и введите команду:

screen -r

./create_zone.sh zonebld 192.168.0 3
zlogin zonebld

Команды ниже выполняются в зоне.

cat > prepare.sh <<SCRPT
#!/bin/bash
WORKSPACE=/export/home/admin/du2

apt-get clean
apt-get autoclean
apt-get remove libiconv-dev -y

cat > /etc/apt/sources.list <<EOT
deb http://10.20.50.188/dilos dg2-unstable main contrib non-free
deb http://10.20.50.188/dilos du2-unstable main contrib non-free
deb-src http://10.20.50.188/dilos du2-unstable main contrib non-free
EOT
apt-get update -y

apt-get install -y bison dh-exec cmake docbook-xml docbook-xsl libgtest-dev screenapt-get install -y acl iputils-ping kbd ksh scheduler system-data-console-fonts git
apt-get install -y traceroute gmake build-essential man-db po-debconf po4a debhelper
apt-get install -y libx11-6 libxi6 libxtst6 liblua5.2-dev libnghttp2-dev libjansson-dev
apt-get install -y mawk doxygen graphviz libdb-dev libgdbm-dev libsqlite3-dev libpq-dev

#/usr/bin/ln -fs libX11.so.6 /usr/lib/64/libX11.so.4
#/usr/bin/ln -fs libXi.so.6 /usr/lib/64/libXi.so.5
#/usr/bin/ln -fs libXtst.so.6 /usr/lib/64/libXtst.so.1

cp /etc/apt/sources.list /etc/apt/sources.list.bak
cat > /etc/apt/sources.list <<EOT
deb [trusted=yes] http://192.168.0.2/dilos du2-prebuild main contrib non-free
deb-src [trusted=yes] http://192.168.0.2/dilos du2-prebuild main contrib non-free
EOT
cp /etc/apt/sources.list /etc/apt/sources.list.dev

apt-get update -y

#test -f /var/lib/dpkg/lock && rm -f /var/lib/dpkg/lock
#test -f /var/cache/apt/archives/lock && rm -f /var/cache/apt/archives/lock
#dpkg --configure -a
rm -rf \${WORKSPACE} && mkdir -p \${WORKSPACE}

apt-get upgrade -y

env DEBIAN_FRONTEND=noninteractive apt-get install -y -f
env DEBIAN_FRONTEND=noninteractive apt-get install -y openssh-server
SCRPT

chmod 777 ./prepare.sh
./prepare.sh

cat > build_all.sh <<EOT
#!/bin/bash

BLD_PARALLEL="4"
WORKSPACE=/export/home/admin/du2

#STOP_ON_ERROR=1
STOP_ON_ERROR=0
#GCC_COMPILER="gcc-6"
GCC_COMPILER=""

# Build a component: \$1 - component name, \$2 - stop-on-error flag
function build_component {
  local START_TIME
  local END_TIME
  local BLD_RESULT

  BLD_RESULT="/data/repo/du/\$1"
  test -z "\$1" && exit 1
  test -d \${BLD_RESULT} && rm -rf \${BLD_RESULT}
  DEB_BUILD_OPTIONS="nocheck notest parallel=\${BLD_PARALLEL}"
  export DEB_BUILD_OPTIONS
  test -d \${WORKSPACE}/\$1 && rm -rf \${WORKSPACE}/\$1
  mkdir -p \${WORKSPACE}/\$1
  cd \${WORKSPACE}/\$1
  START_TIME=\$(date +%s)
  echo "====================== \$1 ======================"  | tee berror.log
  if [[ \$2 -eq 0 ]]; then
    apt-get build-dep -y \$1 >> berror.log || return 0 2>&1
    apt-get source --compile \$1 >> berror.log || return 0 2>&1
  else
    apt-get build-dep -y \$1 >> berror.log || return 1 2>&1
    apt-get source --compile \$1 >> berror.log || return 1 2>&1
  fi
  END_TIME=\$(date +%s)
  printf "%06d %s\\n" \$((\${END_TIME} - \${START_TIME})) \$1 >> \${WORKSPACE}/tmpbt.log
  mkdir -p \${BLD_RESULT}
  cp -ax *.deb \${BLD_RESULT}/ || exit 1
  cp -ax *.changes \${BLD_RESULT}/ || exit 1
  cp -ax *.buildinfo \${BLD_RESULT}/ || exit 1
}

if [[ "\$GCC_COMPILER" != "" ]]; then
  echo "====================== Building \$COMPGCC ======================"
  | tee berror.logbuild_component \$GCC_COMPILER 1
  if [[ \$STOP_ON_ERROR$? -eq 01 ]]; then
    exit 1
  fi
  dpkg apt-get build-dep -y \$COMP >> berror.log || continue 2>&1
    apt-get source --compile \$COMP >> berror.log || continue 2>&1
  else
    apt-get build-dep -y \$COMP >> berror.log || exit 1 2>&1
    #DEB_BUILD_OPTIONS="nocheck notest parallel=4" apt-get source --compile \$COMP || exit 1
    apt-get source --compile \$COMP >> berror.log || exit 1 2>&1
  fi

  mkdir -p \${BLD_RESULT}
  cp -ax *.deb \${BLD_RESULT}/ || exit 1
  cp -ax *.changes \${BLD_RESULT}/ || exit 1
  cp -ax *.buildinfo \${BLD_RESULT}/ || exit 1
done < /data/repo/pkg/list_component
EOT

chmod 777 ./build_all.sh
./build_all.sh

Если Вы подключились по SSH и хотите отключиться от сессии SSH или отключить свой компьютер на время, то выполните следующую команду:

screen ./build_all.sh

Дальше в любой момент Вы можете нажать Ctrl-A d, после чего отключиться от сессии SSH.

Затем когда Вы захотите вернуться, залогиньтесь снова по SSH и введите команду:

screen -r

Note : Если Вам нужно сначала собрать компилятор GCC и провести построение при его помощи, то укажите имя компоненты компилятора в переменной GCC_COMPILER, например:

GCC_COMPILER="gcc-6". Его точное имя можно посмотреть в файле list_component.