Page Comparison

...

Code Block

language	bash

sudo apt update
reboot
sudo apt install system-test-nettest testrunner python3

...

Expand

title	To understand that dynamic address is received,

for example, for cz zone you can with the command:

Code Block
sudo zlogin -l root cz ifconfig

You will get an answer like this:

Code Block

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000 
int0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 2
        inet 192.168.0.100 netmask ffffff00 broadcast 192.168.0.255
        ether 2:8:20:f1:af:75 
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128

First it can be empty, then with inet 0.0.0.0address for int0 interface here, and then with real received address - here it is inet 192.168.0.100.

The same way you can use for sz an rz zones as well.

...

Info

Note : You can run the test using a shell script. It can be created with any text editor or by executing the following command:

ztest@zone:~# cat > test-script.sh <<EOT

#!/bin/bash

boot_zone() {

echo Shutting down zone \$1...

sudo zoneadm -z \$1 halt

echo Cleaning zone \$1 dataset...

sudo zoneadm -z \$1 uninstall -F

sudo zfs destroy -fr rpool/zones/\$1

echo Booting zone \$1...

sudo zoneadm -z \$1 clone \$1-orig && sudo zoneadm -z \$1 boot

ip=""

while [ "\${ip}" == "" ] || [ "\${ip}" == "0.0.0.0" ]

do

ip=\$(sudo zlogin -l root \$1 ifconfig | grep -A 1 "\${2}" | sed "/\${2}/d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//")

done

echo "Zone:\$1 ------> \$2:\$ip"

}

echo Starting tests...

ipa=\$(sudo ifconfig | grep -A 1 vmxnet3s0 | sed '1d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//')

if [ -n "\$1" ]; then

CLOG="/var/tmp/net-stability.\$(date +%F-%T).txt"

echo "=== Stability net tests \$(date +%F-%T) ===" > \${CLOG}

for (( i=1; i<=\$1; i++ ))

do

echo "------------------ Pass \${i} ---------------------" 2>&1 | /usr/bin/tee -a \${CLOG}

boot_zone cz int1

boot_zone sz int2

boot_zone rz int3

LOG="/var/tmp/net-test.\$i.txt"

uname -a > \${LOG}

echo "IP Address : \${ipa}" >> \${LOG}

echo "" >> \${LOG}

echo ----------------------------- IP Address ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo ifconfig | grep -A 1 vmxnet3s0 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Zones ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo zoneadm list -v 2>&1 | /usr/bin/tee -a \${LOG}

echo ---------------------------- DHCP Server ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo svcs -z dhcp isc-dhcp-server 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Tests ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo /opt/net-tests/bin/nettest /var/tmp 2>&1 | /usr/bin/tee -a /var/tmp/a.tmp

percent="\$(grep 'Percent passed:' /var/tmp/a.tmp | sed 's/Percent passed:[ \\t]*//; s/[ \\t]*\$//')"

folder="\$(grep 'Log directory:' /var/tmp/a.tmp | sed 's/Log directory:[ \\t]*//; s/[ \\t]*\$//')"

rt="\$(grep 'Running Time:' /var/tmp/a.tmp | sed 's/Running Time:[ \\t]*//; s/[ \\t]*\$//')"

echo " Percent passed: \${percent}" >> \${CLOG}

echo " Running Time: \${rt}" >> \${CLOG}

sed -n '/Results Summary/,/Log directory:/p' /var/tmp/a.tmp >> \${LOG}

echo "" >> \${LOG}

cat /var/tmp/a.tmp >> \${LOG}

rm -f /var/tmp/a.tmp

if [ "\${percent}" == "100.0%" ]; then

sudo rm -f \${LOG}

sudo rm -r -f \${folder}

else

echo " PASS \${i} IS FAILED! (See \${LOG})" >> \${CLOG}

echo "Fault on \${i} pass! Just \${percent} are successfull. You can find logs in \${folder}." 2>&1 | /usr/bin/tee -a \${LOG}

exit 1

fi

done

else

boot_zone cz int1

boot_zone sz int2

boot_zone rz int3

LOG="/var/tmp/nettest.\$(date +%F-%T).txt"

uname -a > \${LOG}

echo "IP Address : \${ipa}" >> \${LOG}

echo "" >> \${LOG}

echo ----------------------------- IP Address ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo ifconfig | grep -A 1 vmxnet3s0 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Zones ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo zoneadm list -v 2>&1 | /usr/bin/tee -a \${LOG}

echo ---------------------------- DHCP Server ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo svcs -z dhcp isc-dhcp-server 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Tests ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo /opt/net-tests/bin/nettest /var/tmp 2>&1 | /usr/bin/tee -a /var/tmp/a.tmp

sed -n '/Results Summary/,/Log directory:/p' /var/tmp/a.tmp >> \${LOG}

fail=\$(sed -n '/^FAIL[ \\t]*/p' /var/tmp/a.tmp | sed 's/^FAIL[ \\t]*//; s/[ \\t]*\$//')

pass=\$(sed -n '/^PASS[ \\t]*/p' /var/tmp/a.tmp | sed 's/^PASS[ \\t]*//; s/[ \\t]*\$//')

total=0

if [ "\${pass}" != "" ]; then

total=\$((\${total} + \${pass}))

fi

if [ "\${fail}" != "" ]; then

total=\$((\${total} + \${fail}))

fi

echo "TOTAL TESTS: \${total}" >> \${LOG}

echo "" >> \${LOG}

cat /var/tmp/a.tmp >> \${LOG}

rm -f /var/tmp/a.tmp

fi

EOT

ztest@zone:~# sed -i '/./!d' test-script.sh && chmod 777 test-script.sh

You can run the test script in a single mode, i.e. all tests will be executed once (./test-script.sh - without parameters). After running of this script you will find the log in the /var/tmp/nettest.<ISO TIME>.txt file. It will contain information in the format that is used in Test Results.

5.

...

Running in

...

stability mode

...

Versions Compared

Old Version 35

New Version Current

Key