Note : You can run the test using a shell script. It can be created with any text editor or by executing the following command: ztest@zone:~# cat > test-script.sh <<EOT
#!/bin/bash
ipa=\$(sudo ifconfig | grep -A 1 vmxnet3s0 | sed '1d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//')
if [ -n "\$1" ]; then
CLOG="/var/tmp/elf-stability.\$(date +%F-%T).txt"
echo "=== Stability elf tests \$(date +%F-%T) ===" > \${CLOG}
for (( i=1; i<=\$1; i++ ))
do
echo "------------------ Pass \${i} ---------------------" 2>&1 | /usr/bin/tee -a \${CLOG}
LOG="/var/tmp/elftest.\$i.txt"
uname -a > \${LOG}
echo "IP Address : \${ipa}" >> \${LOG}
sudo /opt/elf-tests/bin/elftest 2>&1 | /usr/bin/tee -a \${LOG}
percent="\$(grep 'Percent passed:' \${LOG} | sed 's/Percent passed:[ \\t]*//; s/[ \\t]*\$//')"
folder="\$(grep 'Log directory:' \${LOG} | sed 's/Log directory:[ \\t]*//; s/[ \\t]*\$//')"
rt="\$(grep 'Running Time:' \${LOG} | sed 's/Running Time:[ \\t]*//; s/[ \\t]*\$//')"
echo " Percent passed: \${percent}" >> \${CLOG}
echo " Running Time: \${rt}" >> \${CLOG}
sed -n '/Results Summary/,/Log directory:/p' \${LOG} > a.tmp
echo "---------------------------------------------------------" >> a.tmp
echo "" >> a.tmp
cat \${LOG} >> a.tmp
mv -f a.tmp \${LOG}
if [ "\${percent}" == "100.0%" ]; then
sudo rm -f \${LOG}
sudo rm -f /var/tmp/*.o /var/tmp/*.c /var/tmp/*.le
sudo rm -r -f \${folder}
else
echo " PASS \${i} IS FAILED! (See \${LOG})" >> \${CLOG}
echo "Fault on \${i} pass! Just \${percent} are successfull. You can find logs in \${folder}." 2>&1 | /usr/bin/tee -a \${LOG}
exit 1
fi
done
else
LOG="/var/tmp/elftest.\$(date +%F-%T).txt"
uname -a > a.tmp
echo "IP Address : \${ipa}" >> a.tmp
echo "" >> a.tmp
sudo /opt/elf-tests/bin/elftest 2>&1 | /usr/bin/tee -a \${LOG}
sed -n '/Results Summary/,/Log directory:/p' \${LOG} >> a.tmp
fail=\$(sed -n '/^FAIL[ \\t]*/p' a.tmp | sed 's/^FAIL[ \\t]*//; s/[ \\t]*\$//')
pass=\$(sed -n '/^PASS[ \\t]*/p' a.tmp | sed 's/^PASS[ \\t]*//; s/[ \\t]*\$//')
total=0
if [ "\${pass}" != "" ]; then
total=\$((\${total} + \${pass}))
fi
if [ "\${fail}" != "" ]; then
total=\$((\${total} + \${fail}))
fi
echo "TOTAL TESTS: \$total" >> a.tmp
echo "---------------------------------------------------------" >> a.tmp
echo "" >> a.tmp
cat \${LOG} >> a.tmp
mv -f a.tmp \${LOG}
fi
EOT
ztest@zone:~# sed -i '/./!d' test-script.sh && chmod 777 test-script.sh
You can run the test script in a single mode, i.e. all tests will be executed once (./test-script.sh - without parameters). After running of this script you will find the log in the /var/tmp/elftest.<ISO TIME>.txt file. It will contain information in the format that is used in Test Results. And the second one is stability mode - for testing the elf stability. In this case you should put the number of cycles (for example, to run 1000 cycles - ./test-script.sh 1000). And now after script is finished the common log will be placed to the /var/tmp/elf-stability.<ISO TIME>.txt file, and you will find logs about separate cycles in elftest.<N>.txt form in the /var/tmp folder, where <N> - is a cycle number. |