Prepare build environment
Add unstable repo to /etc/apt/sources.list
deb https://apt2.dilos.org/dilos dg3-unstable main contrib non-free deb https://apt2.dilos.org/dilos du3-unstable main contrib non-free deb https://apt2.dilos.org/dilos dg2-unstable main contrib non-free deb https://apt2.dilos.org/dilos du2-unstable main contrib non-free deb-src https://apt2.dilos.org/dilos du3-unstable main contrib non-free deb-src http://mirrors.kernel.org/debian/ buster-updates main contrib non-free deb-src http://mirrors.kernel.org/debian/ buster-proposed-updates main contrib non-free deb-src http://mirrors.kernel.org/debian/ buster-backports main contrib non-free deb-src http://mirrors.kernel.org/debian/ buster main contrib non-free
To build packages into a new repo (du3) we need to use old build environment based on du2, but new packages should come from the new repo, that is why we placed du3 above du2 in the list.
deb-src lines instruct apt where it should get upstream source packages. In our example it is buster (a codebase of debian).
update existing packages:
apt-get update
Perhaps you will see key errors due to update stage something like this:
update errors
du3p03% sudo apt-get update Hit:2 https://apt2.dilos.org/dilos dg3-unstable InRelease Hit:1 http://mirrors.edge.kernel.org/debian buster-updates InRelease Hit:3 https://apt2.dilos.org/dilos du3-unstable InRelease Hit:4 https://apt2.dilos.org/dilos dg2-unstable InRelease Hit:5 https://apt2.dilos.org/dilos du2-unstable InRelease Hit:6 http://mirrors.edge.kernel.org/debian buster-proposed-updates InRelease Hit:7 http://mirrors.edge.kernel.org/debian buster-backports InRelease Hit:8 http://mirrors.edge.kernel.org/debian buster InRelease Err:1 http://mirrors.edge.kernel.org/debian buster-updates InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 Err:6 http://mirrors.edge.kernel.org/debian buster-proposed-updates InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 Err:7 http://mirrors.edge.kernel.org/debian buster-backports InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 Err:8 http://mirrors.edge.kernel.org/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 NO_PUBKEY EF0F382A1A7B6500 NO_PUBKEY DCC9EFBF77E11517 Reading package lists... Done W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://mirrors.edge.kernel.org/debian buster-updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://mirrors.edge.kernel.org/debian buster-proposed-updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://mirrors.edge.kernel.org/debian buster-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://mirrors.edge.kernel.org/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 NO_PUBKEY EF0F382A1A7B6500 NO_PUBKEY DCC9EFBF77E11517 W: Failed to fetch http://mirrors.kernel.org/debian/dists/buster-updates/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: Failed to fetch http://mirrors.kernel.org/debian/dists/buster-proposed-updates/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: Failed to fetch http://mirrors.kernel.org/debian/dists/buster-backports/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 W: Failed to fetch http://mirrors.kernel.org/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 NO_PUBKEY EF0F382A1A7B6500 NO_PUBKEY DCC9EFBF77E11517 W: Some index files failed to download. They have been ignored, or old ones used instead.
This means you should add these public keys to the system. Do it as:
add public keys
du3p03% sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 648ACFD622F3D138 EF0F382A1A7B6500 DCC9EFBF77E11517 Executing: /tmp/apt-key-gpghome.0nsKnHHLVF/gpg.1.sh --keyserver keyserver.ubuntu.com --recv-keys 648ACFD622F3D138 EF0F382A1A7B6500 DCC9EFBF77E11517 gpg: key DCC9EFBF77E11517: public key "Debian Stable Release Key (10/buster) <debian-release@lists.debian.org>" imported gpg: key EF0F382A1A7B6500: public key "Debian Stable Release Key (9/stretch) <debian-release@lists.debian.org>" imported gpg: key DC30D7C23CBBABEE: public key "Debian Archive Automatic Signing Key (10/buster) <ftpmaster@debian.org>" imported gpg: Total number processed: 3 gpg: imported: 3
Ok, now these keys have been imported, let's update it once again:
update once again
du3p03% sudo apt-get update Hit:1 https://apt2.dilos.org/dilos dg3-unstable InRelease Hit:2 https://apt2.dilos.org/dilos du3-unstable InRelease Hit:4 https://apt2.dilos.org/dilos dg2-unstable InRelease Hit:5 https://apt2.dilos.org/dilos du2-unstable InRelease Hit:3 http://mirrors.edge.kernel.org/debian buster-updates InRelease Hit:6 http://mirrors.edge.kernel.org/debian buster-proposed-updates InRelease Hit:7 http://mirrors.edge.kernel.org/debian buster-backports InRelease Hit:8 http://mirrors.edge.kernel.org/debian buster InRelease Reading package lists... Done du3p03%
Install build packages:
install packages:
du3p03% apt-get install gmake build-essential
If you want to build some package from an existing repo you need to install git to clone the repo:
install git
du3p01% sudo apt-get install git
Now clone a repo (du3), at this stage you have created an account at bitbucket and ask to provide you access by info: http://www.dilos.org/conact-me
clone repo:
du3p03% git clone https://bitbucket.org/dilos/du3.git
go to components directory:
cd du3/components
you are ready to build your package from userland, for example: apt
cd <du3>/components/p0f gmake JOBS=4 deb (JOBS is the number of parallel build processes you want to use)
After the building process is done, you find the built package(s) in <du3>/components/${component}/build directory
How to port a new package
Choose a package you want to port. For example, apache2. Go to the debian packages page at https://packages.debian.org/buster-backports/apache2 and copy the correct name of the source package in the right column ("Download Source Package apache2:"). Remember (or copy) "apache2". Install additional packages to manipulate the source code:
dpkg-dev
du3p03% sudo apt-get install dpkg-dev Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: binutils libdpkg-perl make patch Suggested packages: binutils-doc debian-keyring gcc | c-compiler bzr make-doc ed diffutils-doc Recommended packages: build-essential gcc | c-compiler fakeroot libalgorithm-merge-perl libfile-fcntllock-perl liblocale-gettext-perl The following NEW packages will be installed: binutils dpkg-dev libdpkg-perl make patch 0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded. Need to get 6277 kB of archives. After this operation, 46.4 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 https://apt2.dilos.org/dilos du3-unstable/main solaris-i386 binutils solaris-i386 2.31.1-1+dilos3 [4409 kB] Get:2 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 libdpkg-perl all 1.19.7+dilos5 [706 kB] Get:3 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 patch solaris-i386 2.7.6-3+dilos1 [137 kB] Get:4 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 make solaris-i386 4.1-9.1-2+dilos2 [316 kB] Get:5 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 dpkg-dev all 1.19.7+dilos5 [708 kB] Fetched 6277 kB in 8s (740 kB/s) Selecting previously unselected package binutils. (Reading database ... 15551 files and directories currently installed.) Preparing to unpack .../binutils_2.31.1-1+dilos3_solaris-i386.deb ... Unpacking binutils (2.31.1-1+dilos3) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../libdpkg-perl_1.19.7+dilos5_all.deb ... Unpacking libdpkg-perl (1.19.7+dilos5) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.6-3+dilos1_solaris-i386.deb ... Unpacking patch (2.7.6-3+dilos1) ... Selecting previously unselected package make. Preparing to unpack .../make_4.1-9.1-2+dilos2_solaris-i386.deb ... Unpacking make (4.1-9.1-2+dilos2) ... Selecting previously unselected package dpkg-dev. Preparing to unpack .../dpkg-dev_1.19.7+dilos5_all.deb ... Unpacking dpkg-dev (1.19.7+dilos5) ... Setting up binutils (2.31.1-1+dilos3) ... Setting up make (4.1-9.1-2+dilos2) ... Setting up patch (2.7.6-3+dilos1) ... Setting up libdpkg-perl (1.19.7+dilos5) ... Setting up dpkg-dev (1.19.7+dilos5) ... Processing triggers for install-info (6.5.0.dfsg.1-1+dilos1) ... du3p03%
Now download the source code into your build environment:
download source code
du3p03% apt-get source apache2 Reading package lists... Done NOTICE: 'apache2' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/apache-team/apache2.git Please use: git clone https://salsa.debian.org/apache-team/apache2.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 10.4 MB of source archives. Get:1 http://mirrors.edge.kernel.org/debian buster-backports/main apache2 2.4.43-1~bpo10+1 (dsc) [3530 B] Get:2 http://mirrors.edge.kernel.org/debian buster-backports/main apache2 2.4.43-1~bpo10+1 (tar) [9348 kB] Get:3 http://mirrors.edge.kernel.org/debian buster-backports/main apache2 2.4.43-1~bpo10+1 (asc) [488 B] Get:4 http://mirrors.edge.kernel.org/debian buster-backports/main apache2 2.4.43-1~bpo10+1 (diff) [1015 kB] Fetched 10.4 MB in 6s (1660 kB/s) dpkg-source: info: extracting apache2 in apache2-2.4.43 dpkg-source: info: unpacking apache2_2.4.43.orig.tar.gz dpkg-source: info: unpacking apache2_2.4.43-1~bpo10+1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying fhs_compliance.patch dpkg-source: info: applying no_LD_LIBRARY_PATH.patch dpkg-source: info: applying suexec-CVE-2007-1742.patch dpkg-source: info: applying customize_apxs.patch dpkg-source: info: applying build_suexec-custom.patch dpkg-source: info: applying reproducible_builds.diff dpkg-source: info: applying buffer-http-request-bodies-for-tlsv13.diff dpkg-source: info: applying tlsv13-add-logno.diff du3p01%
Now we can port the package. First of all you should install (possible) all dependencies to build the package. At this stage the build system does now know anything about dependencies, install them manually:
list of build dependencies
du3p01% cd apache2-2.4.43 du3p01% dpkg-checkbuilddeps dpkg-checkbuilddeps: error: Unmet build dependencies: debhelper (>= 10) bison jdupes libapr1-dev (>= 1.6.0) libaprutil1-dev (>= 1.6.0) libbrotli-dev liblua5.2-dev libnghttp2-dev libpcre3-dev libssl-dev (>= 1.1.1) libxml2-dev lsb-release zlib1g-dev libcurl4-openssl-dev | libcurl4-dev libjansson-dev
Now you can try to install them:
install dependencies
du3p01% sudo apt-get install debhelper bison jdupes libapr1-dev libaprutil1-dev libbrotli-dev liblua5.2-dev libnghttp2-dev libpcre3-dev libssl-dev libxml2-dev lsb-release zlib1g-dev libcurl4-openssl-dev libjansson-dev Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package jdupes
As you see we have no package jdupes and we should port it first to build apache2, repeat the steps to download all dependecy packages until you have done.
jdupes
du3p03% apt-get source jdupes Reading package lists... Done NOTICE: 'jdupes' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/debian/jdupes.git Please use: git clone https://salsa.debian.org/debian/jdupes.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 124 kB of source archives. Get:1 http://mirrors.edge.kernel.org/debian buster-backports/main jdupes 1.18.1-1~bpo10+1 (dsc) [1878 B] Get:2 http://mirrors.edge.kernel.org/debian buster-backports/main jdupes 1.18.1-1~bpo10+1 (tar) [109 kB] Get:3 http://mirrors.edge.kernel.org/debian buster-backports/main jdupes 1.18.1-1~bpo10+1 (diff) [13.0 kB] Fetched 124 kB in 1s (80.2 kB/s) dpkg-source: info: extracting jdupes in jdupes-1.18.1 dpkg-source: info: unpacking jdupes_1.18.1.orig.tar.gz dpkg-source: info: unpacking jdupes_1.18.1-1~bpo10+1.debian.tar.xz du3p03%
check jdupes dependencies
du3p03% cd jdupes-1.18.1 du3p03% dpkg-checkbuilddeps dpkg-checkbuilddeps: warning: cannot determine CC system type, falling back to default (native compilation) dpkg-checkbuilddeps: error: Unmet build dependencies: debhelper-compat (= 13)
install jdupes dependencies
du3p03% sudo apt-get install debhelper-compat Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'debhelper' instead of 'debhelper-compat' The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils bsdutils ctftools dh-autoreconf file gcc-6 gcc-6-libatomic gcc-6-libcc1 gcc-6-libcilkrts gcc-6-libgfortran gcc-6-libgo gcc-6-libgomp gcc-6-libitm gcc-6-libobjc gcc-6-libquadmath gcc-defaults gettext groff-base intltool-debian libc1-dev libcroco3 libdebhelper-perl libgdbm3 libglib2.0-0 libisl19 libmagic-mgc libmagic1 libmpc3 libsendfile libtool m4 man-db po-debconf system-crt system-header Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gcj-jdk m4-doc less www-browser libmail-box-perl Recommended packages: curl | wget | lynx-cur libglib2.0-data shared-mime-info xdg-user-dirs libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils bsdutils ctftools debhelper dh-autoreconf file gcc-6 gcc-6-libatomic gcc-6-libcc1 gcc-6-libcilkrts gcc-6-libgfortran gcc-6-libgo gcc-6-libgomp gcc-6-libitm gcc-6-libobjc gcc-6-libquadmath gcc-defaults gettext groff-base intltool-debian libc1-dev libcroco3 libdebhelper-perl libgdbm3 libglib2.0-0 libisl19 libmagic-mgc libmagic1 libmpc3 libsendfile libtool m4 man-db po-debconf system-crt system-header 0 upgraded, 40 newly installed, 0 to remove and 7 not upgraded. Need to get 466 MB of archives. After this operation, 1505 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 bsdutils solaris-i386 1:2.29.2-1+dilos10 [113 kB] Get:2 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 groff-base solaris-i386 1.22.3-9-2+dilos1 [1338 kB] Get:3 https://apt2.dilos.org/dilos du2-unstable/main solaris-i386 bsdmainutils solaris-i386 9.0.12+nmu1+dilos1 [205 kB] /*** cut ***/ Setting up ctftools (2.0.2.70) ... Setting up autoconf (2.69-10-3) ... Setting up libisl19:solaris-i386 (0.20-2+dilos1) ... Setting up groff-base (1.22.3-9-2+dilos1) ... Setting up automake (1:1.15-4-2) ... update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-4-1+dilos1) ... Setting up gcc-6-libgo:solaris-i386 (6.4.0-1+dilos27) ... Setting up man-db (2.7.6.1-2+dilos4) ... Building database of manual pages ... Setting up intltool-debian (0.35.0+20060710.4) ... Setting up gcc-6:solaris-i386 (6.4.0-1+dilos27) ... Setting up po-debconf (1.0.20) ... Setting up gcc-defaults (1.150-1+dilos3) ... Setting up libtool (2.4.6-2-1+dilos1) ... Setting up dh-autoreconf (19) ... Setting up debhelper (13.1+dilos5) ... Processing triggers for install-info (6.5.0.dfsg.1-1+dilos1) ... Processing triggers for mime-support (3.62-1+dilos2) ... du3p03%
Recheck build dependency again to be sure there are no unmet dependencies:
recheck dependencies
du3p03% dpkg-checkbuilddeps du3p03%
Well, done. Now we are ready to port the package to our platform.
There are three files (or more) you should check.
debian/changelog
This file controls the target package version and the repo you wnat to place the binary packages to. Let's see at the structure:
changelog
jdupes (1.18.1-1~bpo10+1) buster-backports; urgency=medium * Rebuild for buster-backports. -- Joao Eriberto Mota Filho <eriberto@debian.org> Wed, 15 Jul 2020 17:56:23 -0300 /*** cut ***/
- jdupes - the package name
- 1.18.1-1~bpro10+1 - version of the package
- buster-backports - target repo
- rebuild for buster-backports - a message which changes have been made (and why)
- -- Joao Eriberto Mota Filho <eriberto@debian.org> Wed, 15 Jul 2020 17:56:23 -0300 - who made the changes and when
We add a new record to the file on top (like the LIFO or stack).
changes in changlog
jdupes (1.18.1-1~bpo10+1+dilos1) unstable; urgency=medium * Build for DilOS. -- DilOS Team <dilos@dilos.org> Mon, 10 Aug 2020 12:06:57 +0300 jdupes (1.18.1-1~bpo10+1) buster-backports; urgency=medium * Rebuild for buster-backports. -- Joao Eriberto Mota Filho <eriberto@debian.org> Wed, 15 Jul 2020 17:56:23 -0300
As you see we added +dilos1 to the version (to mark our changes), the repo now is unstable (if you plan to contribute the result to the main repo), the message says it is a build for DilOS and the last line shows who did the changes. To generate the date just use date -R command in the shell:
date -R
du3p03% date -R Mon, 10 Aug 2020 12:06:57 +0300
The file is ready and we're preparing next file...
debian/control
This file is used to specify dependencies o build the package(s):
dependencies
Build-Depends: debhelper-compat (= 13)
You see it ad check stage.
Also the file contains list of the producced packages and their architechtures:
packages and architectures
Package: jdupes
Architecture: any
Multi-Arch: foreign
Depends: ${misc:Depends}, ${shlibs:Depends}
Description: identify and delete or link duplicate files
/*** cut ***/
Built package will have name jdupes (as the source package). Architecture any means for any platform. It could be:
- any - for any architectures (binary package)
- all - for all plafroms (documentation, configurations etc)
- linux-any - platform specific package (in this example for linux only), we cannot build such packages (as is)
In this example we don't need to change anything, just leave it as is.
debian/rules
Speaking shortly it is a Makefile that is used to build all target packages (from the contol file, using version from changelog). Usualy the file contains valid options to build packages for our platform, but from time to time you need to change something. For example, gnu ld accepts -Wl,-as-needed option, illumos ld does not, just remove this option from the list. Other cases are too specific to describe them as example, just ask us on #dilos at FreeNode or via the mail list.
debian/pre* and post* scripts
Another stuff is he pre/post scripts, probably you should change them (if package has them). Our platform should be able to bootstrap zones, it means the packages could be installed into an alternative root. For this purpose we use BASEDIR environment variable to specify it (it comes from apt/apt-get). Let's take an example from reprepro package:
postinst
desktop% pwd
/export/home/denis/projects/dilos/du3/components
desktop% cat reprepro/debian/postinst
#!/bin/sh
set -e
if [ "${BASEDIR:=/}" = "/" ]; then
BASEDIR=""
fi
case "$1" in
configure)
if [ -f ${BASEDIR}/etc/bash_completion.d/reprepro.dpkg-remove ] ; then
echo "Removing obsolete unmodified conffile /etc/bash_completion.d/reprepro"
rm -f ${BASEDIR}/etc/bash_completion.d/reprepro.dpkg-remove
fi
;;
esac
#DEBHELPER#
exit 0
If we install the package as is (in the current environment) the BASEDIR is "/" and we just clear it.
du3/components/<package>
When the porting has done and all packages built you should place it into the du3 repo. Create a directory (usualy by the source package name), in our examples it is apache2 and/or jdupes.
make directory
du3p03% mkdir -p du3/components/jdupes
Create the Makefile to build the package by CI (jenkins):
Makefile
du3p01% cat du3/components/jdupes/Makefile
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
#
# Copyright (c) 2020 DilOS Team <dilos@dilos.org>
#
include ../../make-rules/shared-macros.mk
COMPONENT_NAME= jdupes
include ../../make-rules/deb_src2.mk
#
build:
@echo "Nothing build"
install:
@echo "Nothing install"
clean:
$(RM) -r $(BUILD_DIR)
# $(RM) *.changes
# $(RM) *.deb
clobber: clean
test: $(NO_TESTS)
Copy the whole debian directory from the package tree to the component repo directory, add it to git, commit it and create a PR (pull request).
debian copy
du3p03% cp -R <jdupes-version>/debian du3/componens/jdupes
produce a new source
To build a source package do the command from the main package tree:
build source package
du3p03% sudo dpkg-buildpackage -d -S -us -uc -sa
dpkg-buildpackage: info: source package jdupes
dpkg-buildpackage: info: source version 1.18.1-1~bpo10+1+dilos1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by DilOS Team <dilos@dilos.org>
dpkg-source --before-build .
dpkg-source: warning: can't parse dependency tree:native
dpkg-source: warning: can't parse dependency tree:native
debian/rules clean
dh clean
dh_auto_clean
make -j1 distclean
make[1]: Entering directory '/export/home/denis/projects/dilos/porting/jdupes-1.18.1'
rm -f jdupes.o jody_paths.o jody_sort.o jody_win_unicode.o jody_strtoepoch.o string_malloc.o jody_cacheinfo.o act_deletefiles.o act_linkfiles.o act_printmatches.o act_summarize.o act_printjson.o xxhash.o act_dedupefiles.o jdupes-standalone build_date.h jdupes jdupes.exe *~ *.gcno *.gcda *.gcov
rm -f *.pkg.tar.xz
rm -f -r jdupes-*-win*/ jdupes-*-win*.zip
rm -f -r jdupes-*-mac*/ jdupes-*-mac*.zip
make[1]: Leaving directory '/export/home/denis/projects/dilos/porting/jdupes-1.18.1'
dh_clean
dpkg-source -b .
dpkg-source: warning: can't parse dependency tree:native
dpkg-source: warning: can't parse dependency tree:native
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building jdupes using existing ./jdupes_1.18.1.orig.tar.gz
dpkg-source: info: building jdupes in jdupes_1.18.1-1~bpo10+1+dilos1.debian.tar.xz
dpkg-source: info: building jdupes in jdupes_1.18.1-1~bpo10+1+dilos1.dsc
dpkg-genbuildinfo --build=source
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges -sa --build=source >../jdupes_1.18.1-1~bpo10+1+dilos1_source.changes
dpkg-genchanges: info: including full source code in upload
dpkg-source --after-build .
dpkg-source: warning: can't parse dependency tree:native
dpkg-source: warning: can't parse dependency tree:native
dpkg-buildpackage: info: full upload (original source is included)
du3p03%
The file *.changes (jdupes_1.18.1-1~bpo10+1+dilos1_source.changes) has all files that should be copied as the source package.
That's all.