...
Code Block |
---|
title | Installing the package |
---|
|
root@dilos:~# apt-get install isc-dhcp-server |
Edit the configuration file /etc/dhcp/dhcpd.conf for IPv4 or /etc/dhcp/dhcpd6.conf for IPv6.
Code Block |
---|
|
# A slightly different configuration for an internal subnet.
#subnetsubnet 10192.5168.50.0 netmask 255.255.255.2240 {
# range 10.5.5.26 10.5.5.30;
#192.168.0.100 192.168.0.200;
option subnet-mask 255.255.255.0;
option domain-name-servers ns18.internal8.example8.org8;
# option domain-name "internal.example.org";
# option routers 10192.5168.50.1254;
# option broadcast-address 10192.5168.50.31255;
# default-lease-time 600;
# max-lease-time 7200;
#} |
Edit the configuration file /etc/default/isc-dhcp-server for IPv4 or for IPv6. Find out the name of the network interface - ifconfig. Now you can run the server:
Code Block |
---|
|
# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)
# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
#DHCPDv4_CONF=/etc/dhcp/dhcpd.conf
#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf
# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
#DHCPDv4_PID=/var/run/dhcpd.pid
#DHCPDv6_PID=/var/run/dhcpd6.pid
# Additional options to start dhcpd with.
# Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
#OPTIONS=""
# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACESv4="vnic8"
INTERFACESv6="" |
Code Block |
---|
title | starting the service |
---|
|
root@dilos:~# svcadm enable isc-dhcp-server |
...
Info |
---|
If you see some services in the output of svcs -xv, this means the services were configured incorrect. Check their configuratiuon configuration files and then try to do command svcadm clear service |
...
...