| Code Block | ||
|---|---|---|
| ||
#!/bin/bash
ipa=$(sudo ifconfig | grep -A 1 vmxnet3s0 | sed '1d; s/^[ \t]*inet[ \t]*//; s/[ \t]*netmask.*$//')
if [ -n "$1" ]; then
CLOG="/var/tmp/util-stability.$(date +%F-%T).txt"
echo "================== Stability util & mdb tests $(date +%F-%T) ==================" > ${CLOG}
uname -a >> ${CLOG}
echo "IP Address : ${ipa}" >> ${CLOG}
for (( i=1; i<=$1; i++ ))
do
echo "--------------------------------------- Pass ${i} ------------------------------------" 2>&1 | /usr/bin/tee -a ${CLOG}
START_TIME=$(date +%s)
LOG="/var/tmp/util-test.$i.txt"
uname -a > ${LOG}
echo "IP Address : ${ipa}" >> ${LOG}
echo "---------------------------------------- UTILS --------------------------------------" 2>&1 | /usr/bin/tee -a ${LOG}
/opt/util-tests/bin/utiltest 2>&1 | /usr/bin/tee -a ${LOG}
percent="$(grep 'Percent passed:' ${LOG} | sed 's/Percent passed:[ \t]*//; s/[ \t]*$//')"
echo " UTILS percent passed: ${percent}" >> ${CLOG}
folder="$(grep 'Log directory:' ${LOG} | sed 's/Log directory:[ \t]*//; s/[ \t]*$//')"
if [ "${percent}" != "100.0%" ]; then
END_TIME=$(date +%s)
delta=$(($END_TIME - $START_TIME))
sec=$(($delta % 60))
let "amin = $delta / 60"
let "hour = $amin / 60"
min=$(($amin%60))
printf " Running time: %02d:%02d:%02d\n" >> ${CLOG}
echo " PASS ${i} IS FAILED! (See ${LOG})" >> ${CLOG}
echo "Fault on ${i} pass! Just ${percent} are successfull. You can find logs in ${folder}." 2>&1 | /usr/bin/tee -a ${LOG}
exit 1
fi
sudo rm -r -f ${folder}
echo "---------------------------------------- MDB --------------------------------------" 2>&1 | /usr/bin/tee -a ${LOG}
/opt/util-tests/bin/utiltest -c /opt/util-tests/runfiles/mdb.run > tmp.log
folder="$(grep 'Log directory:' tmp.log | sed 's/Log directory:[ \t]*//; s/[ \t]*$//')"
sudo rm -f tmp.log
LOG1="${folder}/log"
rt=$(sed '/^Test: /!d;s/ \[[A-Z]*\]//;s/^.*\[//;s/\].*//' ${LOG1})
pass=$(sed -n '/ Tests passed:/p' ${LOG1} | sed 's/^.*Tests passed:[ \t]*//;s/[ \t]*$//')
total=$(sed -n '/ Tests ran:/p' ${LOG1} | sed 's/^.*Tests ran:[ \t]*//;s/[ \t]*$//')
percent=$(echo "scale=1; ${pass}*100.0/${total}" | bc)
folder=$(sed -n '/ output directory:/p' ${LOG1} | sed 's/^.* output directory:[ \t]*//;s/[ \t]*$//')
echo " MDB percent passed: ${percent}" >> ${CLOG}
END_TIME=$(date +%s)
delta=$(($END_TIME - $START_TIME))
sec=$(($delta % 60))
let "amin = $delta / 60"
let "hour = $amin / 60"
min=$(($amin%60))
printf " Running time: %02d:%02d:%02d\n" $hour $min $sec >> ${CLOG}
sed -n '/ Tests passed:/,/ Tests ran:/p' ${LOG1} | sed 's/^.*Tests passed:[ \t]*/PASS \t/;s/^.*Tests failed:[ \t]*/FAIL \t/;s/^.*Tests ran:[ \t]*/TOTAL\t/' > a.tmpcat ${LOG1} 2>&1 | /usr/bin/tee -a ${LOG}
if [ "${percent}" == "100.0" ]; then
sudo echorm "---------------------------------------------------------" >> a.tmp-f ${LOG}
sudo rm -r -f ${folder}
else
echo "" >> a.tmp PASS ${i} IS FAILED! (See cat ${LOG1LOG} 2>&1 | /usr/bin/tee -a a.tmp)" >> ${CLOG}
mvecho -f a.tmp"Fault on ${LOGi} pass! Just ${percent}% are successfull. You can find iflogs [in "${percentfolder}." == "100.0%" ]; then
2>&1 | /usr/bin/tee -a ${LOG}
sudo rmexit -r1
-f ${folder} fi
else done
else
LOG="/var/tmp/util-test.$(date +%F-%T).txt"
echo " uname -a > u.tmp
PASS ${i} IS FAILED! (See ${LOG})" >>echo "IP Address : ${CLOGipa}" >> u.tmp
echo ""Fault on ${i} pass! Just ${percent} are successfull. You can find logs in ${folder}." 2>&1 | >> u.tmp
echo "---------------------------------------- UTILS --------------------------------------" 2>&1 | /usr/bin/tee -a ${LOG}
/opt/util-tests/bin/utiltest 2>&1 exit 1
fi
done
else
LOG="/var/tmp/util-test.$(date +%F-%T).txt"
uname -a > u.tmp
echo "IP Address : ${ipa}" >> u.tmp
echo "" >> u.tmp
echo "---------------------------------------- UTILS | /usr/bin/tee -a ${LOG}
fail=$(sed -n '/^FAIL[ \t]*/p' ${LOG} | sed 's/^FAIL[ \t]*//; s/[ \t]*$//')
pass=$(sed -n '/^PASS[ \t]*/p' ${LOG} | sed 's/^PASS[ \t]*//; s/[ \t]*$//')
utotal=0
if [ "${pass}" != "" ]; then
utotal=$((${utotal} + ${pass}))
fi
if [ "${fail}" != "" ]; then
utotal=$((${utotal} + ${fail}))
fi
echo "----------------------------------------" 2>&1MDB | /usr/ --------------------------------------" 2>&1 | /usr/bin/tee -a ${LOG}
/opt/util-tests/bin/utiltest 2>&1 |-c /usropt/bin/tee -a ${LOG}util-tests/runfiles/mdb.run > tmp.log
failfolder="$(sed -ngrep '/^FAIL[ \t]*/p' ${LOG}Log directory:' tmp.log | sed 's/^FAILLog directory:[ \t]*//; s/[ \t]*$//')"
sudo pass=$(sedrm -n '/^PASS[ \t]*/p' ${LOG} | sed 's/^PASS[ \t]*//; s/[ \t]*$//'f tmp.log
LOG1="${folder}/log"
tm=$(sed '/^Test: /!d;s/ \[[A-Z]*\]//;s/^.*\[//;s/\].*//' ${LOG1})
totalmtotal=0$(sed -n '/ if [ "${pass}" != "" ]; then
Tests ran:/p' ${LOG1} | sed 's/^.*Tests ran:[ \t]*//;s/[ \t]*$//')
total=$((${totalutotal} + ${passmtotal}))
fi
if [ "${fail}" != "" ]; thenecho "TOTAL TESTS: $total" >> u.tmp
total=$((${total} + ${fail}))
fi
echo "TOTAL TESTS: $total" >> u.tmp
echo "echo "-------------------------------------------------- MDB --------------------------------------" 2>&1 | /usr/bin/tee -a ${LOG}" >> u.tmp
echo "UTIL TESTS: $utotal" >> u.tmp
/opt/util-tests/bin/utiltest -c /opt/util-tests/runfiles/mdb.run > tmp.logsed -n '/Results Summary/,/Log directory:/p' ${LOG} >> u.tmp
echo folder="$(grep 'Log directory:' tmp.log | sed 's/Log directory:[ \t]*//; s/[ \t]*$//')"
sudo rm -f tmp.log
LOG1="${folder}/log"
tm=$(sed '/^Test: /!d;s/ \[[A-Z]*\]//;s/^.*\[//;s/\].*//' ${LOG1})
pass=$(sed -n '/ Tests passed:/p' ${LOG1} | sed 's/^.*Tests passed:[ \t]*//;s/[ \t]*$//')
total"---------------------------------------------------------" >> u.tmp
echo "MDB TESTS: $mtotal" >> u.tmp
pass=$(sed -n '/ Tests ranpassed:/p' ${LOG1} | sed 's/^.*Tests ranpassed:[ \t]*//;s/[ \t]*$//')
echo "TOTAL TESTS: $total" >> u.tmp
result=$(echo "scale=1; ${pass}*100.0/${totalmtotal}" | bc)
folder=$(sed -n '/ output directory:/p' ${LOG1} | sed 's/^.* output directory:[ \t]*//;s/[ \t]*$//')
sed -n '/ Tests passed:/,/ Tests ran:/p' ${LOG1} | sed 's/^.*Tests passed:[ \t]*/PASS \t/;s/^.*Tests failed:[ \t]*/FAIL \t/;s/^.*Tests ran:[ \t]*/TOTAL\t/' >> u.tmp
echo "" >> u.tmp
echo "Running Time: 00:${tm}" >> u.tmp
echo "Percent passed: ${result}" >> u.tmp
echo "Log directory: ${folder}" >> u.tmp
echo "---------------------------------------------------------" >> u.tmp
echo "" >> u.tmp
cat ${LOG} >> u.tmp
cat ${LOG1} 2>&1 | /usr/bin/tee -a u.tmp
mv -f u.tmp ${LOG}
fi
|
Page Comparison
General
Content
Integrations