We have ahost a host with the only external IP-address. We want to install many non-global zones to buld build the system and to port packages or for other services. The crossbow helps us to solve this problem. Let’s look at the diagram of the host:
...
In this host we have a physical NIC atge atge0 which connected to an external hardware switch. A virtual interface ext0 (VNIC) was created over the physical NIC (for example, to make a tagged packets). Let’s see at the real example:
...
The interface int0 has created, but it will not forward anything outside. NAT and ip forwarding is are not yet configured. Let’s configure one as it was described here :
| Code Block |
|---|
lenovo# cat /etc/ipf/ipnat.conf map ext0 10.68.0.0/24 -> 0/32 proxy port ftp ftp/tcp map ext0 10.68.0.0/24 -> 0/32 portmap tcp/udp auto map ext0 10.68.0.0/24 -> 0/32 |
...
Now it is enabled, configure the first zone to test the result. Here we do not explain step by step configuring of a non-global zone, it was described here , just do it:
| Code Block |
|---|
lenovo# zonecfg -z zone01 zone01: No such zone configured Use 'create' to begin configuring a new zone. zonecfg:zone01> create zonecfg:zone01> set zonename=zone01 zonecfg:zone01> set zonepath=/zones/zone01 zonecfg:zone01> set autoboot=false zonecfg:zone01> set ip-type=exclusive zonecfg:zone01> add net zonecfg:zone01:net> set physical=iz0 zonecfg:zone01:net> set global-nic=vsw0 zonecfg:zone01:net> add property (name=ip,value="10.68.0.2") zonecfg:zone01:net> add property (name=gateway,value="10.68.0.1") zonecfg:zone01:net> add property (name=netmask,value="255.255.255.0") zonecfg:zone01:net> add property (name=primary,value="true") zonecfg:zone01:net> end zonecfg:zone01> add attr zonecfg:zone01:attr> set name=resolvers zonecfg:zone01:attr> set type=string zonecfg:zone01:attr> set value=192.168.0.1 zonecfg:zone01:attr> end zonecfg:zone01> verify zonecfg:zone01> commit zonecfg:zone01> exit |
...