Page Comparison

...

Info

Note :While there is no any new tested stable version, you can use this BE as a base BE. In other words you can skip all steps from the beginning of this instruction to the current point. To do this execute the following command like you did it for dilos_ISO_orig:

beadm create dilos_BASE

When you later will boot from this BE type the following commands:

beadm activate dilos_BASE

reboot

...

Code Block

language	none

deb http://10.20.50.188/dilos dgdbg-unstable main contrib non-free
deb http://10.20.50.188/dilos dilos2du2-unstable main contrib non-free

or:

Code Block

language	bash

cat > /etc/apt/sources.list <<EOT
deb http://10.20.50.188/dilos dgdbg-unstable main contrib non-free
deb http://10.20.50.188/dilos dilos2du2-unstable main contrib non-free
EOT

...

Code Block

language	bash

root@dilos:~# useradd -m -d /var/ztest -g staff -s /bin/bash ztest
root@dilos:~# passwd ztest
Enter new UNIX password: 
Retype new UNIX password: 
passwd: password updated successfully
root@dilos:~# echo "ztest ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/ztest

...

bash

Expand

title	If you have certificates problems

with the DEBUG version install certificates please:

Code Block

language


root@dilos:~#

useradd

apt

-m

install

-g staff admin root@dilos:~# passwd admin Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully root@dilos:~# echo "admin ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/admin

Expand

title	If you have certificates problems

with the DEBUG version install certificates please:

Code Block
root@dilos:~# apt install ca-certificates

and reboot to the new BE:

Code Block
root@dilos:~# reboot

After reboot login again to the root account.

Check creation of admin account:

Code Block
root@dilos:~# ls /export/home admin og

...

ca-certificates

and reboot to the new BE:

Code Block
root@dilos:~# reboot

After reboot login again to the root account.

3. Configure NAT according the How to configure NET on Virtual Machine for global zone with etherstub instruction until zone creation.

...

Code Block

language	bash

root@dilos:~# zfs create -o mountpoint=/zones rpool/zones
root@dilos:~# mkdir /export/builds

2. First create and run dhcp zone:

Code Block

language	bash

root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/home/admin"
set special="/export/home/admin"
set type="lofs"
end
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT

root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
        dir: /export/home/admin
        special: /export/home/admin
        raw not specified
        type: lofs
        options: [] zfs create -o mountpoint=/zones rpool/zones
root@dilos:~# mkdir /export/builds

2. First create and run dhcp zone:

Code Block

language	bash

root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT

root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
        dir: /export/builds
        special: /export/builds
        raw not specified
        type: lofs
        options: []
net:
        address not specified
        allowed-address not specified
        defrouter not specified
        global-nic: vsw0
        mac-addr not specified
        physical: iz1
        vlan-id not specified
        property: (name=ip,value="192.168.0.1")
        property: (name=netmask,value="255.255.255.0")
        property: (name=gateway,value="192.168.0.254")
        property: (name=primary,value="true")
attr:
        name: resolvers
        type: string
        value: 8.8.8.8
root@dilos:~# zoneadm -z dhcp install 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm -z dhcp boot 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm list -civ
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              dpkg     shared
   1 dhcp             running    /zones/dhcp                    dpkg     excl

...

Code Block

language	bash

grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e 'E:' -e 'cannot' /var/tmp/dhcp-bts.log | sort -u

...

Versions Compared

Old Version 4

New Version Current

Key