Page Comparison

root@dilos:~# zfs create -o mountpoint=/zones rpool/zones
root@dilos:~# mkdir /export/builds

cat > create_zone.sh <<SCRIPT
#!/bin/bash

TYPE_ZONE=\$1
IP=\$2
SER=\$3

cat > \${HOME}/\${TYPE_ZONE}.cmd <<EOT
create
set zonename=\${TYPE_ZONE}
set zonepath=/zones/\${TYPE_ZONE}
set autoboot=false
set ip-type=exclusive
add net
set physical=iz\${SER}
set global-nic=vsw0
add property (name=ip,value="\${IP}.\${SER}")
add property (name=gateway,value="\${IP}.254")
add property (name=netmask,value="255.255.255.0")
add property (name=primary,value="true")
end
add attr
set name=resolvers
set type=string
set value=8.8.8.8
end
add fs
set dir="/export/home"
set special="/export/home"
set type="lofs"
end
add fs
set dir="/data/repo"
set special="/data/repo"
set type="lofs"
end
verify
commit
exit
EOT
zonecfg -z \${TYPE_ZONE} -f \${HOME}/\${TYPE_ZONE}.cmd
zoneadm 2>&1 | /usr/bin/tee -z \a /var/tmp/${TYPE_ZONE} install &&-bts.log
zoneadm -z \${TYPE_ZONE} boot
echo "127.0.0.1 localhost.\${TYPE_ZONE} \${TYPE_ZONE}" >> /zones/\${TYPE_ZONE}/root/etc/hostsinstall 2>&1 | /usr/bin/tee -a /var/tmp/${TYPE_ZONE}-bts.log
zoneadm -z ${TYPE_ZONE} boot 2>&1 | /usr/bin/tee -a /var/tmp/${TYPE_ZONE}-bts.log
echo "127.0.0.1 localhost.${TYPE_ZONE} ${TYPE_ZONE}" >> /zones/${TYPE_ZONE}/root/etc/hosts
res=$(grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e 'E:' -e 'cannot' /var/tmp/${TYPE_ZONE}-bts.log | sort -u)
if [[ "$res" == "" ]]; then
  echo " =========== Zone ${TYPE_ZONE} is successfully created and ready to use ============="
else
  echo " =========== Zone ${TYPE_ZONE} creation log ============="
  echo "$res"
  echo "$res" | sed '/W: --force-yes is deprecated/d; /\/man\//d'
  if [[ "$res" != "" ]]; then
    echo " ========================================================"
    echo "Please stop and report about zone bootstrap errors!"
  fi
fi
SCRIPT

Если Вы подключились по SSH и хотите отключиться от сессии SSH или отключить свой компьютер на время, то выполните следующую команду:

screen ./make_repo.sh

Дальше в любой момент Вы можете нажать Ctrl-A d, после чего отключиться от сессии SSH.

Затем когда Вы захотите вернуться, залогиньтесь снова по SSH и введите команду:

screen -r

cat > prepare.sh <<EOT
#!/bin/bash
WORKSPACE=/export/home/du4

apt-get clean
apt-get autoclean
apt-get remove libiconv-dev -y

apt-get install -y  build-essential git dpkg-dev screen gmake

cp /etc/apt/sources.list /etc/apt/sources.list.bak
echo "" > /etc/apt/sources.list
echo "deb [trusted=yes] http://192.168.0.2/dilos du4-prebuild main contrib non-free" >> /etc/apt/sources.list
echo "deb-src [trusted=yes] http://192.168.0.2/dilos du4-prebuild main contrib non-free" 2>/dev/null >> /etc/apt/sources.list
cp /etc/apt/sources.list /etc/apt/sources.list.dev

apt-get update -y

#test -f /var/lib/dpkg/lock && rm -f /var/lib/dpkg/lock
#test -f /var/cache/apt/archives/lock && rm -f /var/cache/apt/archives/lock
#dpkg --configure -a
rm -rf \${WORKSPACE} && mkdir -p \${WORKSPACE}

apt-get upgrade -y

env DEBIAN_FRONTEND=noninteractive apt-get install -y -f
env DEBIAN_FRONTEND=noninteractive apt-get install -y openssh-server
EOT

cat > build_all.sh <<EOT
#!/bin/bash

BLD_PARALLEL="4"
WORKSPACE=/export/home/du4

#STOP_ON_ERROR=1
STOP_ON_ERROR=0
#GCC_COMPILER="gcc-10"
GCC_COMPILER=""

# Build a component: \$1 - component name, \$2 - stop-on-error flag
function build_component {
  local START_TIME
  local END_TIME
  local BLD_RESULT

  BLD_RESULT="/data/repo/du/\$1"
  test -z "\$1" && exit 1
  test -d \${BLD_RESULT} && rm -rf \${BLD_RESULT}
  DEB_BUILD_OPTIONS="nocheck notest parallel=\${BLD_PARALLEL}"
  export DEB_BUILD_OPTIONS
  test -d \${WORKSPACE}/\$1 && rm -rf \${WORKSPACE}/\$1
  mkdir -p \${WORKSPACE}/\$1
  cd \${WORKSPACE}/\$1
  \${WORKSPACE}/\$1START_TIME=\$(date +%s)
  echo "====================== \$1 ======================"  | tee berror.log
  if [[ \$2 -eq 0 ]]; then
    apt-get build-dep -y \$1 >> berror.log || return 0 2>&1
    apt-get source --compile \$1 >> berror.log || return 0 2>&1
  else
    apt-get build-dep -y \$1 >> berror.log || return 1 2>&1
    apt-get source --compile --compile \$1 >> berror.log || return 1 2>&1
  fi
  END_TIME=\$(date +%s)
  printf "%06d %s\\n" \$((\${END_TIME} - \${START_TIME})) \$1 >> berror.log || return 1 2>&1
  fi\${WORKSPACE}/tmpbt.log
  mkdir -p \${BLD_RESULT}
  cp -ax *.deb \${BLD_RESULT}/ || exit 1
  cp -ax *.changes \${BLD_RESULT}/ || exit 1
  cp -ax *.buildinfo \${BLD_RESULT}/ || exit 1

}

if [[ "\$GCC_COMPILER" != "" ]]; then
  echo "====================== Building GCC ======================"
  build_component \$GCC_COMPILER 1
  if [[ \$? -eq 1 ]]; then
    exit 1
  fi
  dpkg -i \$WORKSPACE/\$GCC_COMPILER/*.deb
fi

if [[ ! -f \$WORKSPACE/build_components ]]; then
fi   dpkg -i cp /data/repo/pkg/list_component \$WORKSPACE/\$GCC_COMPILER/*.deb
fi
build_components
fi
rm -f tmpbt.log
while read COMP; do
  if [[ "" == "\$COMP" ]] || [[ "\$GCC_COMPILER" == "\$COMP" ]]; then
    continue
  fi
  build_component \$COMP \$STOP_ON_ERROR
  if [[ \$? -eq 1 ]]; then
    exit 1
  fi
done < /data/repo/pkg/list_component\$WORKSPACE/build_components
sort tmpbt.log > build_components
sed -i 's/^[0-9]* //g' build_components
EOT

Если Вы подключились по SSH и хотите отключиться от сессии SSH или отключить свой компьютер на время, то выполните следующую команду:

screen ./build_all.sh

Дальше в любой момент Вы можете нажать Ctrl-A d, после чего отключиться от сессии SSH.

Затем когда Вы захотите вернуться, залогиньтесь снова по SSH и введите команду:

screen -r

cat > check_fails.sh <<EOT
#!/bin/bash

#WDIR=\$1
WDIR=/export/home/du4

subdirs=\$(ls -1 \$WDIR)

for dr in \$subdirs
do
  res=\$(tail -1 \$WDIR/\$dr/berror.log)
  if [[ "\$(echo \$res | grep 'Fetched')" == "" ]]; then
    cat \$WDIR/\$dr/berror.log
  fi
done
echo ""
echo "================= Local repo sources"
cat /etc/apt/sources.list
EOT
chmod 777 ./check_fails.sh
./check_fails.sh