Page Comparison

...

Select please an ISO-file (the Datastore ISO file menu item) to install DilOS:

...

Select version with UEFI support you would like to set as a base version - for example, the last one:

...

Set the Connected At Power On checkbox to connect ISO-file automatically on power on:

...

As you see ISO-file emulates CD-ROM on VM, and you need to boot from CD-ROM. To do this the BIOS screen should be loaded first on power on. In the Firmware select please EFI. To emulate running of EFI you have to select the During the next boot, force entry into the setup screen checkbox on the VM Options page in Boot Options :

...

Step 2. Run VM

Run your VM by clicking the Power | Power On menu item:

...

Info

Note :While there is no any new tested stable version, you can use this BE as a base BE. In other words you can skip all steps from the beginning of this instruction to the current point. To do this execute the following command like you did it for dilos_ISO_orig:

beadm create dilos_BASE

When you later will boot from this BE type the following commands:

beadm activate dilos_BASE

reboot

...

Code Block

language	none

deb http://10.20.50.188/dilos dgdbg-unstable main contrib non-free
deb http://10.20.50.188/dilos dilos2du2-unstable main contrib non-free

or:

Code Block

language	bash

cat > /etc/apt/sources.list <<EOT
deb http://10.20.50.188/dilos dgdbg-unstable main contrib non-free
deb http://10.20.50.188/dilos dilos2du2-unstable main contrib non-free
EOT

...

Info
Note : Here you can install packages required for specified test categories if you’d like. Package names are specified inside an instruction for those test category (LIBC, NET, OS etc.). But however you can do it later.

2. Now you can use a script or do the following steps. Create user ztestCheck that upgrade was successful by entering the following command:

Code Block

language	bash

root@dilos:~# useradd -m -d /var/ztest -g staff -s /bin/bash ztest
root@dilos:~# passwd ztest
Enter new UNIX password: 
Retype new UNIX password: 
passwd: password updated successfully
root@dilos:~# echo "ztest ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/ztest

...

grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e 'E:' -e 'cannot' /var/tmp/os-upgrade.log | sort -u

2. Now you can use a script or do the following steps. Create user ztest:

Code Block

language	bash

root@dilos:~# useradd -m -d /var/ztest -g staff admin-s /bin/bash ztest
root@dilos:~# passwd adminztest
Enter new UNIX password: 
Retype new UNIX password: 
passwd: password updated successfully
root@dilos:~# echo "adminztest ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/adminztest

Expand

title	If you have certificates problems

with the DEBUG version install certificates please:

Code Block
root@dilos:~# apt install ca-certificates

and reboot to the new BE:

Code Block
root@dilos:~# reboot

After reboot login again to the root account.

Check creation of admin account:

Code Block
root@dilos:~# ls /export/home admin og

3. Configure 3. Configure NAT according the How to configure NET on Virtual Machine for global zone with etherstub instruction until zone creation.

...

Code Block

language	bash

root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/home/admin"
set special="/export/home/admin"
set type="lofs"
end
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT

root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
        dir: /export/home/admin
        special: /export/home/admin
        raw not specified
        type: lofs
        options: []

commit
EOT

root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
        dir: /export/builds
        special: /export/builds
        raw not specified
        type: lofs
        options: []
net:
        address not specified
        allowed-address not specified
        defrouter not specified
        global-nic: vsw0
        mac-addr not specified
        physical: iz1
        vlan-id not specified
        property: (name=ip,value="192.168.0.1")
        property: (name=netmask,value="255.255.255.0")
        property: (name=gateway,value="192.168.0.254")
        property: (name=primary,value="true")
attr:
        name: resolvers
        type: string
        value: 8.8.8.8
root@dilos:~# zoneadm -z dhcp install 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm -z dhcp boot 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm list -civ
  ID NAME             STATUS     PATH                           BRAND    IP    
   0 global           running    /                              dpkg     shared
   1 dhcp             running    /zones/dhcp/dhcp                    dpkg     excl

You can check that zone was installed successfully by entering the following command:

Code Block

language	bash

grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e  dpkg     excl'E:' -e 'cannot' /var/tmp/dhcp-bts.log | sort -u

3. Login to the zone, check addresses and install and run dhcp-server:

...

Versions Compared

Old Version 1

New Version Current

Key

Step 2. Run VM