Page Comparison

Note : Тесты можно запустить при помощи тестового скрипта. Его можно создать либо в текстовом редакторе, либо при помощи команды:

ztest@zone:~# cat > test-script.sh <<EOT

#!/bin/bash

boot_zone() {

echo "Shutting down zone \$1..." 2>&1 | /usr/bin/tee -a \${3}

sudo zoneadm -z \$1 halt 2>&1 | /usr/bin/tee -a \${3}

echo "Cleaning zone \$1 dataset..." 2>&1 | /usr/bin/tee -a \${3}

sudo zoneadm -z \$1 uninstall -F 2>&1 | /usr/bin/tee -a \${3}

sudo zfs destroy -fr rpool/zones/\$1 2>&1 | /usr/bin/tee -a \${3}

echo "Booting zone \$1..." 2>&1 | /usr/bin/tee -a \${3}

sudo zoneadm -z \$1 clone \$1-orig 2>&1 | /usr/bin/tee -a \${3}

sudo zoneadm -z \$1 boot 2>&1 | /usr/bin/tee -a \${3}

res=\$(sudo zoneadm list | grep \$1)

if [[ "\$res" == "" ]]; then

echo "Zone \$1 is not run. Test is aborted." 2>&1 | /usr/bin/tee -a \${3}

exit 1

fi

ip=""

while [ "\${ip}" == "" ] || [ "\${ip}" == "0.0.0.0" ]

do

ip=\$(sudo zlogin -l root \$1 ifconfig | grep -A 1 "\${2}" | sed "/\${2}/d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//")

done

echo "Zone:\$1 ------> \$2:\$ip" 2>&1 | /usr/bin/tee -a \${3}

}

echo Starting tests...

ipa=\$(sudo ifconfig | grep -A 1 vmxnet3s0 | sed '1d; s/^[ \\t]*inet[ \\t]*//; s/[ \\t]*netmask.*\$//')

if [ -n "\$1" ]; then

CLOG="/var/tmp/net-stability.\$(date +%F-%T).txt"

echo "=== Stability net tests \$(date +%F-%T) ===" > \${CLOG}

for (( i=1; i<=\$1; i++ ))

do

echo "------------------ Pass \${i} ---------------------" 2>&1 | /usr/bin/tee -a \${CLOG}

uname -a > \${LOG}

echo "IP Address : \${ipa}" >> \${LOG}

echo "" >> \${LOG}

echo ----------------------------- Booting zones... ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

boot_zone cz int1 \${LOG}

boot_zone sz int2 \${LOG}

boot_zone rz int3 \${LOG}

echo "" >> \${LOG}

echo ----------------------------- IP Address ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo ifconfig | grep -A 1 vmxnet3s0 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Zones ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo zoneadm list -v 2>&1 | /usr/bin/tee -a \${LOG}

echo ---------------------------- DHCP Server ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo svcs -z dhcp isc-dhcp-server 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Tests ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo /opt/net-tests/bin/nettest /var/tmp 2>&1 | /usr/bin/tee -a /var/tmp/a.tmp

percent="\$(grep 'Percent passed:' /var/tmp/a.tmp | sed 's/Percent passed:[ \\t]*//; s/[ \\t]*\$//')"

folder="\$(grep 'Log directory:' /var/tmp/a.tmp | sed 's/Log directory:[ \\t]*//; s/[ \\t]*\$//')"

rt="\$(grep 'Running Time:' /var/tmp/a.tmp | sed 's/Running Time:[ \\t]*//; s/[ \\t]*\$//')"

echo " Percent passed: \${percent}" >> \${CLOG}

echo " Running Time: \${rt}" >> \${CLOG}

sed -n '/Results Summary/,/Log directory:/p' /var/tmp/a.tmp >> \${LOG}

echo "" >> \${LOG}

cat /var/tmp/a.tmp >> \${LOG}

rm -f /var/tmp/a.tmp

if [ "\${percent}" == "100.0%" ]; then

sudo rm -f \${LOG}

sudo rm -r -f \${folder}

else

echo " PASS \${i} IS FAILED! (See \${LOG})" >> \${CLOG}

echo "Fault on \${i} pass! Just \${percent} are successfull. You can find logs in \${folder}." 2>&1 | /usr/bin/tee -a \${LOG}

exit 1

fi

done

else

LOG="/var/tmp/nettest.\$(date +%F-%T).txt"

uname -a > \${LOG}

echo "IP Address : \${ipa}" >> \${LOG}

echo "" >> \${LOG}

echo ----------------------------- Booting zones... ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

boot_zone cz int1 \${LOG}

boot_zone sz int2 \${LOG}

boot_zone rz int3 \${LOG}

echo "" >> \${LOG}

echo ----------------------------- IP Address ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo ifconfig | grep -A 1 vmxnet3s0 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Zones ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo zoneadm list -v 2>&1 | /usr/bin/tee -a \${LOG}

echo ---------------------------- DHCP Server ---------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo svcs -z dhcp isc-dhcp-server 2>&1 | /usr/bin/tee -a \${LOG}

echo ------------------------------- Tests ------------------------- 2>&1 | /usr/bin/tee -a \${LOG}

sudo /opt/net-tests/bin/nettest /var/tmp 2>&1 | /usr/bin/tee -a /var/tmp/a.tmp

sed -n '/Results Summary/,/Log directory:/p' /var/tmp/a.tmp >> \${LOG}

fail=\$(sed -n '/^FAIL[ \\t]*/p' /var/tmp/a.tmp | sed 's/^FAIL[ \\t]*//; s/[ \\t]*\$//')

pass=\$(sed -n '/^PASS[ \\t]*/p' /var/tmp/a.tmp | sed 's/^PASS[ \\t]*//; s/[ \\t]*\$//')

total=0

if [ "\${pass}" != "" ]; then

total=\$((\${total} + \${pass}))

fi

if [ "\${fail}" != "" ]; then

total=\$((\${total} + \${fail}))

fi

echo "TOTAL TESTS: \${total}" >> \${LOG}

echo "" >> \${LOG}

cat /var/tmp/a.tmp >> \${LOG}

rm -f /var/tmp/a.tmp

fi

EOT

ztest@zone:~# sed -i '/./!d' test-script.sh && chmod 777 test-script.sh

Тестовый скрипт можно запустить в одиночном режиме, т.е. когда все тесты выполняются один раз (./test-script.sh без параметров). Тогда после запуска этого скрипта в файле /var/tmp/nettest.<ISO TIME>.txt Вы найдёте лог в формате, в котором он публикуется в Test Results.