...
| Info |
|---|
Note :While there is no any new tested stable version, you can use this BE as a base BE. In other words you can skip all steps from the beginning of this instruction to the current point. To do this execute the following command like you did it for dilos_ISO_orig: beadm create dilos_BASE
When you later will boot from this BE type the following commands: beadm activate dilos_BASE
reboot
|
...
| Code Block |
|---|
|
root@dilos:~# useradd -m -d /var/ztest -g staff -s /bin/bash ztest
root@dilos:~# passwd ztest
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@dilos:~# echo "ztest ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/ztest |
...
| Expand |
|---|
| title | If you have certificates problems |
|---|
|
with the DEBUG version install certificates please: |
language | bash | useradd-m-g staff admin
and reboot to the new BE: | Code Block |
|---|
root@dilos:~# reboot |
After reboot login again to the root account. |
Check creation of admin account:
| Code Block |
|---|
root@dilos:~# passwd admin
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@dilos:~# echo "admin ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/admin |
| Expand |
|---|
| title | If you have certificates problems |
|---|
|
with the DEBUG version install certificates please: | Code Block |
|---|
root@dilos:~# apt install ca-certificates |
and reboot to the new BE: | Code Block |
|---|
root@dilos:~# reboot |
After reboot login again to the root account. |
Check creation of admin account:
| Code Block |
|---|
root@dilos:~# ls /export/home
admin og |
...
3. Configure NAT according the How to configure NET on Virtual Machine for global zone with etherstub instruction until zone creation.
...
| Code Block |
|---|
|
root@dilos:~# zfs create -o mountpoint=/zones rpool/zones
root@dilos:~# mkdir /export/builds |
2. First create and run dhcp zone:
| Code Block |
|---|
|
root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/home/admin"
set special="/export/home/admin"
set type="lofs"
end
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT
root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
dir: /export/home/admin
special: /export/home/admin
raw not specified
type: lofs
options: []~# zfs create -o mountpoint=/zones rpool/zones
root@dilos:~# mkdir /export/builds |
2. First create and run dhcp zone:
| Code Block |
|---|
|
root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT
root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
dir: /export/builds
special: /export/builds
raw not specified
type: lofs
options: []
net:
address not specified
allowed-address not specified
defrouter not specified
global-nic: vsw0
mac-addr not specified
physical: iz1
vlan-id not specified
property: (name=ip,value="192.168.0.1")
property: (name=netmask,value="255.255.255.0")
property: (name=gateway,value="192.168.0.254")
property: (name=primary,value="true")
attr:
name: resolvers
type: string
value: 8.8.8.8
root@dilos:~# zoneadm -z dhcp install 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm -z dhcp boot 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm list -civ
ID NAME STATUS PATH BRAND IP
0 global running / dpkg shared
1 dhcp running /zones/dhcp dpkg excl |
...