Page Comparison

Note :До выхода новой оттестированнойстабильной версии Вы можете использовать этот BE в качестве базового, т.е. все шаги, которые Вы выполнили от начала инструкции до этого места, можно будет пропустить. Для этого аналогично dilos_ISO_orig выполните команду:

beadm create dilos_BASE

А когда Вам понадобится загрузиться с этого BE, достаточно будет выполнить команды:

beadm activate dilos_BASE

reboot

root@dilos:~# zlogin dhcp
root@dhcp:~# ifconfig        
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
iz1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 2
        inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
        ether 2:8:20:92:59:94 
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128
root@dhcp:~# apt install isc-dhcp-server -y 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dhcp:~# mv /etc/dhcp/dhcpd.conf /etc/dhcp/dhcpd.conf.bckp
root@dhcp:~# cat > /etc/dhcp/dhcpd.conf <<EOT
# A slightly different configuration for an internal subnet.
subnet 192.168.0.0 netmask 255.255.255.0 {
  range 192.168.0.100 192.168.0.200;
  option subnet-mask 255.255.255.0;
  option domain-name-servers 8.8.8.8;
#  option domain-name "internal.example.org";
  option routers 192.168.0.254;
  option broadcast-address 192.168.0.255;
  default-lease-time 600;
  max-lease-time 7200;
}
EOT
root@dhcp:~# ifconfig 
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
iz1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 2
        inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
        ether 2:8:20:92:59:94
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128
root@dhcp:~# cat > /etc/default/isc-dhcp-server <<EOT
# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)

# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).
#DHCPDv4_CONF=/etc/dhcp/dhcpd.conf
#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf

# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).
#DHCPDv4_PID=/var/run/dhcpd.pid
#DHCPDv6_PID=/var/run/dhcpd6.pid

# Additional options to start dhcpd with.
#       Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead
#OPTIONS=""

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACESv4="iz1"
INTERFACESv6=""
EOT
root@dhcp:~# svcadm enable isc-dhcp-server 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dhcp:~# svcs -xv
root@dhcp:~# svcs isc-dhcp-server
STATE          STIME    FMRI
online         10:46:50 svc:/network/isc-dhcp-server:default
root@dhcp:~# dhcp-lease-list 
To get manufacturer names please download http://standards.ieee.org/regauth/oui/oui.txt to /usr/local/etc/oui.txt
Reading leases from /var/lib/dhcp/dhcpd.leases
MAC                IP              hostname       valid until         manufacturer        
===============================================================================================
root@dhcp:~# exit
logout