...
| Info |
|---|
Note :While there is no any new tested stable version, you can use this BE as a base BE. In other words you can skip all steps from the beginning of this instruction to the current point. To do this execute the following command like you did it for dilos_ISO_orig:
When you later will boot from this BE type the following commands:
|
...
| Info |
|---|
Note : Here you can install packages required for specified test categories if you’d like. Package names are specified inside an instruction for those test category (LIBC, NET, OS etc.). But however you can do it later. |
2. Now you can use a script or do the following steps. Create user ztestCheck that upgrade was successful by entering the following command:
| Code Block | ||
|---|---|---|
| ||
root@dilos:~# useradd -m -d /var/ztest -g staff -s /bin/bash ztest root@dilos:~# passwd ztest grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e 'ERROR:' /var/tmp/os-upgrade.log | sort -u |
2. Now you can use a script or do the following steps. Create user ztest:
| Code Block | ||
|---|---|---|
| ||
root@dilos:~# useradd -m -d /var/ztest -g staff -s /bin/bash ztest
root@dilos:~# passwd ztest
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@dilos:~# echo "ztest ALL=(ALL:ALL) NOPASSWD: ALL" >> /etc/sudoers.d/ztest |
...
| Code Block | ||
|---|---|---|
| ||
root@dilos:~# cat > dhcp.cmd <<EOT
create -b
set zonepath=/zones/dhcp
set brand=dpkg
set autoboot=true
set ip-type=exclusive
add fs
set dir="/export/home/admin"
set special="/export/home/admin"
set type="lofs"
end
add fs
set dir="/export/builds"
set special="/export/builds"
set type="lofs"
end
add net
set physical="iz1"
set global-nic="vsw0"
add property (name=ip,value="192.168.0.1")
add property (name=netmask,value="255.255.255.0")
add property (name=gateway,value="192.168.0.254")
add property (name=primary,value="true")
end
add attr
set name="resolvers"
set type="string"
set value="8.8.8.8"
end
verify
commit
EOT
root@dilos:~# zonecfg -z dhcp -f dhcp.cmd
root@dilos:~# zonecfg -z dhcp info
zonename: dhcp
zonepath: /zones/dhcp
brand: dpkg
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
fs-allowed:
uuid: 46b79185-7320-4ab6-b700-15058bd49c02
fs:
dir: /export/home/admin
special: /export/home/admin
raw not specified
type: lofs
options: []
fs:
dir: /export/builds
special: /export/builds
raw not specified
type: lofs
options: []
net:
address not specified
allowed-address not specified
defrouter not specified
global-nic: vsw0
mac-addr not specified
physical: iz1
vlan-id not specified
property: (name=ip,value="192.168.0.1")
property: (name=netmask,value="255.255.255.0")
property: (name=gateway,value="192.168.0.254")
property: (name=primary,value="true")
attr:
name: resolvers
type: string
value: 8.8.8.8
root@dilos:~# zoneadm -z dhcp install 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm -z dhcp boot 2>&1 | /usr/bin/tee -a /var/tmp/dhcp-bts.log
root@dilos:~# zoneadm list -civ
ID NAME STATUS PATH BRAND IP
0 global running / dpkg shared
1 dhcp running /zones/dhcp dpkg excl |
You can check that zone was installed successfully by entering the following command:
| Code Block | ||
|---|---|---|
| ||
grep -e 'WARNING:' -e 'warning:' -e 'W:' -e 'error:' -e 'ERROR:' /var/tmp/dhcp-bts.log | sort -u |
3. Login to the zone, check addresses and install and run dhcp-server:
...