Page Comparison

ztest@dilos:~# cat > cz-orig.cfg <<EOT
create
set zonepath=/zones/cz-orig
set autoboot=false
set ip-type=exclusive
add net
set physical=int1
set global-nic="vsw0"
add property (name="ip",value="dhcp")
add property (name="primary",value="true")
end
commit
exit
EOT
ztest@dilos:~# sudo zonecfg -z cz-orig -f cz-orig.cfg && sudo zoneadm -z cz-orig install

ztest@dilos:~# cat > sz-orig.cfg <<EOT
create
set zonepath=/zones/sz-orig
set autoboot=false
set ip-type=exclusive
add net
set physical=int2
set global-nic="vsw0"
add property (name="ip",value="dhcp")
add property (name="primary",value="true")
end
commit
exit
EOT
ztest@dilos:~# sudo zonecfg -z sz-orig -f sz-orig.cfg && sudo zoneadm -z sz-orig install

ztest@dilos:~# cat > rz-orig.cfg <<EOT
create
set zonepath=/zones/rz-orig
set autoboot=false
set ip-type=exclusive
add net
set physical=int3
set global-nic="vsw0"
add property (name="ip",value="dhcp")
add property (name="primary",value="true")
end
commit
exit
EOT
ztest@dilos:~# sudo zonecfg -z rz-orig -f rz-orig.cfg && sudo zoneadm -z rz-orig install

for example, for cz zone you can with the command:

sudo zlogin -l root cz ifconfig

You will get an answer like this:

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000 
int0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 2
        inet 192.168.0.100 netmask ffffff00 broadcast 192.168.0.255
        ether 2:8:20:f1:af:75 
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128 

First it can be empty, then with inet 0.0.0.0address for int0 interface here, and then with real received address - here it is inet 192.168.0.100.

The same way you can use for sz an rz zones as well.